x

View Demo

Loads :
MOD DR: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588, 613, 981, 1226, 1471, 1839) MOD DSR: 10kgf, 15kgf, 15.6kgf, 30kgf, 31.2kgf, 45kgf (N 98, 147, 153, 294, 306, 441)
Rockwell Principle

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Rockwell principle DIN and ASTM E18. also reading Brinell HB30 standard scales HB10/5 for aluminium and light alloys. NR3D for small and medium dimension Low cost and realiable quality. Rockwell Model or Rockwell Superficial Model avaliable

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Antares is the new ERNST 20X light microscope for BRINELL reading. 6 mm long scale - 0.05 mm graduations.Suitable for checking of mechanical components. The built-in leds provide an excellent and even illumination of the Brinell indentation's edge, avoiding that ambient light reaches the impression and disturbs the reading. In this way, accurate and reliable results are ensured in any situation. Rugged aluminium housing provides durability and great efficiency up to 50 hours continuous operation without replacing the battery (a lamp on the main body indicates that light is on). The scope is delivered complete with ring for improve stability during testing and with stainless steel base for testing in tight locations.

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Digital Brinell microscope all these problems allowing quick, automatic, and accurate readings with no operator influence on the measurement. The magnified indentation on the screen also permits detection of any defect in the surface finish or the indentation.

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Portable Wireless Hardness Tester

• Suitable on site measurement
• Adjustable in all direction
• 1 Diamond Indenter for entire range of metal
• HRC/HRB/HB30/HV/DPTH/N.mm2
• Made in Italy

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Rockwell principle of preload and test load with static load Operate with all kinds of material without changing indenter Can work with stand to have very consistent measurement Standard scales : HRC, HRB, HB30, N/mm², HV, DPTH ASTM E-18, ISO 6506/6507/6508 & DIN 50157

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View Demo

Portable miniaturised Rockwell Hardness Tester Applying Rockwell principle Preload 7kgf and full Load 100kgf (981N) Standard scales : HRC, HB30, N/mm² It develop a dynamic system, which radically differs from known. ASTM-E18, ISO6506/6507/6508 & DIN50157

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Handy Esatest X operates according to the ERNST patented ESATEST® principle of hardness determination through electrical resistance. The diamond indenter can be compared to a little potentiometer, which, while gradually penetrating into the material, obtains all the data (load-hardness) during the whole phase of load application. ASTM-18, ISO 6506/6507/6508 & DIN 50158

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Pin Impact hardness tester is designed following the Brinell hardness test method. The test force is controlled by a shear pin. After reading the diameter of the indention with the reading microscope, the Brinell hardness value can be obtained from the look up table. This kind of hammer impact Brinell hardness tester is capable of testing from small to very large specimens. It is especially suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut. The test can be completed in any direction to test the hardness of upper, lower and lateral part of the specimen. Standard scales : HB30, N/mm², kg/mm² Applied force causes penetration of the indenter into surface with a load determined by a calibrated expendable shear pin. Resulting accuracy is comparable to the bench hardness tester

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

The upper and the side surface are finished highly precise by grinding. The jaw plate, the body and the moving plate are given

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Made of cast iron Trested HRC45 on the sliding surface for wear resistance Standard guide block (2 pieces per set)

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now

x

View PDF Download PDF

View Demo

Made of engineering plastic (PBT resin) High strength materials and stiffness The weight is one tenth of steel.

Add to Enquiry

This product is already in your quote request list.

Browse the list

Buy Now